What is the best speaker for a conference room in New Orleans?

Conference rooms prioritise speech intelligibility, even coverage, and seamless integration with AV control systems. Ceiling loudspeakers are ideal because they distribute sound uniformly across the table area, reducing hot spots and feedback. The SSOUNDS CL6 and CL8 ceiling loudspeakers are designed for low-profile installation and deliver clear voice reproduction. For rooms with higher ceilings or where ceiling mounting is impractical, the LC8.2 and LC16.2 slim column loudspeakers offer controlled vertical dispersion, keeping sound on the listeners and away from microphones. The P4, P5, P6T, P10T, and P12T install loudspeakers provide flexible options, with T models supporting 70/100 V lines for long cable runs. M series point-source boxes and subwoofers can be added for larger spaces or when low-frequency reinforcement is needed, though for speech-only conference rooms they are rarely required.

Selection depends on room size, ceiling height, and acoustic treatment. For a typical conference room up to 10 metres by 8 metres with a 3 metre ceiling, four to six CL6 ceiling loudspeakers on a 70 V line, powered by an A series networked amplifier with DSP, will provide even coverage. Larger rooms or those with high ceilings may benefit from LC8.2 or LC16.2 columns mounted on the front wall, aiming down toward the audience. The number of loudspeakers is determined by the coverage angle and the required intelligibility; a simple rule is to place loudspeakers so that each listener is within the coverage pattern of at least one, with overlap for consistency. SSOUNDS engineers use AI-assisted acoustic modeling to predict coverage and optimise placement before installation.

Integration with beamforming microphones and echo cancellation is straightforward when the loudspeaker system is properly zoned and processed. The A series amplifiers include DSP with presets for SSOUNDS loudspeakers, and Dante networking allows audio to be routed from the conferencing codec or DSP. Ceiling loudspeakers should be on separate zones from the microphones to allow the echo canceller to reference the far-end signal accurately. One-touch control can be achieved via a control system that interfaces with the amplifier's DSP presets. SSOUNDS designs and installs across New Orleans, working with integrators and consultants to specify the right system for each room.