SSOUNDS · SS-WMB8
SSOUNDS Wall Mount Bracket
M 시리즈 및 M3 컬럼 어레이용 틸트 조절 벽면 및 천장 마운트 브래킷. TÜV 인증, 최대 80kg 하중 지원.
컴팩트 SSOUNDS 시리즈용 강철 벽면 및 천장 마운트 브래킷, TÜV 인증 및 최대 하중 80kg. 힌지 요크가 브래킷 자체에 각인된 각도 눈금에 따라 0도 평평한 상태에서 30도까지 틸트를 설정하며, 잠금 하드웨어로 고정되어 룸 튜닝 후에도 조준이 흔들리지 않습니다. 두 플레이트 모두 슬롯형 마운팅 홀이 있어 설치 중 측면 조정이 가능하며, 동일한 브래킷이 M-4, M-6, M-8 포인트 소스 캐비닛과 M3.6P 및 M3.12P 컬럼 어레이에 사용됩니다. 전체 분체 도장 강철.
Key features
- TÜV certified, rated to a maximum load of 80 kg
- Fits M-4, M-6 and M-8 point source cabinets plus M3.6P and M3.12P column arrays
- Tilt set against an angle scale stamped on the bracket, 0 to 30 degrees
- Captive locking hardware holds the aim after tuning
- Slotted holes on both plates for lateral adjustment during installation
- Wall or ceiling mounting from the same part
- Powder-coated steel
Specifications
Engineering data. The conditions each figure is specified under are stated below the table.
General
- Type
- Tilt-adjustable wall and ceiling mount bracket
- Compatibility
- M-4, M-6, M-8, M3.6P, M3.12P
- Certifications
- TÜV
Mechanical
- Maximum load
- 80 kg / 176 lb
- Tilt range
- 0° to 30°, marked scale on the bracket
- Adjustment
- Slotted mounting holes on both plates
- Locking
- Captive locking hardware
Physical
- Material
- Powder-coated steel
- Mounting
- Wall or ceiling
- Net weight1
- 7 kg / 15 lb
Measurement conditions
- Net weight excludes packaging, flight case, accessories and optional rigging hardware.
- All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.
Downloads
Product documentation, free to open. No registration, no form. The data sheet is a PDF rendered from the page below it; the manual is a print page, so use your browser to print it or save it as PDF.
- Technical data sheetFull specification set with the measurement conditions for each figure, modelled response curves, safety notices and warranty terms.PDF · SS-DS-WMB8-EN-A4 · Rev. 2608 · Issued 15 Aug 2026
- Technical data sheet, in your browserThe same document as a page, if you would rather read it here or print it yourself.HTML print view · SS-DS-WMB8-EN-A4 · Rev. 2608 · Issued 15 Aug 2026
- Architectural and engineering specificationThe “shall be” paragraph for tender documents and bills of quantities, written from this product’s own specification rows. Section of the data sheet.HTML section · SS-DS-WMB8-EN-A4
- User manualUnpacking, connection, installation, operating limits, maintenance schedule and troubleshooting for this model.HTML print view · SS-UM-WMB8-EN-A4 · Rev. 2608 · Issued 15 Aug 2026
Loudspeaker data files for prediction software (GLL and CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Email support@s-soundspro.com and we will send the current release for this model.
More in Accessories
SSOUNDS
SSOUNDS Dolly for XTO 10P
Transport dolly for XTO 10P, 4 cabinets per dolly. TÜV certified.
SSOUNDS
SSOUNDS Dolly for XTO 12P
Transport dolly for XTO 12P, 4 cabinets per dolly. TÜV certified.
SSOUNDS
SSOUNDS Flying Bumper for LS208
Array rigging frame for LS208. M22 shackle standard. TÜV certified.
SSOUNDS
SSOUNDS Flying Bumper for LS310
Array rigging frame for LS310. M22 shackle standard. TÜV certified.
SSOUNDS
SSOUNDS Flying Bumper for XTO 10P
Array rigging frame for XTO 10P. M22 shackle standard. TÜV certified.
SSOUNDS
SSOUNDS Flying Bumper for XTO 12P
Array rigging frame for XTO 12P. M22 shackle standard. TÜV certified.