SSOUNDS · SS-A34X
SSOUNDS A34X
قريبًا. مضخم Class-D رباعي القنوات، 4 × 3,000 واط عند 8 أوم، إدخال تناظري، بدون معالج إشارات رقمي مدمج.
إن A34X هو النظير التناظري لـ D34X: نفس القنوات الأربع من Class-D بقدرة 3,000 واط لكل قناة عند 8 أوم، بدون معالج الإشارات الرقمي المدمج أو Dante أو التحكم عبر الشبكة. حدده عندما تكون المعالجة موجودة بالفعل في مرحلة سابقة داخل معالج النظام، وكل ما تحتاجه هو الطاقة. تواصل معنا لتسجيل اهتمامك أو لتخطيط نظام حوله.
Key features
- Coming soon, shipping date on request
- 4 × 3,000 W into 8 Ω, 4 × 6,000 W into 4 Ω, 24,000 W total
- Same output stage as the D34X, without onboard DSP
- Analog XLR input with selectable sensitivity
- For systems processed upstream by an external DSP
Specifications
Engineering data. The conditions each figure is specified under are stated below the table.
General
- Type
- 4-channel Class-D power amplifier, analog input
- Protection
- Over-current · thermal · DC · short-circuit
- Cooling
- Forced-air front-to-rear, variable-speed fans under continuous temperature monitoring
- Certifications
- CE · UKCA · TÜV (rack mounting) · FCC · cULus · EAC · RoHS
Electrical
- Channels
- 4 × Class-D
- Power @ 8 Ω
- 4 × 3,000 W
- Power @ 4 Ω
- 4 × 6,000 W
- Minimum load impedance1
- 2 Ω (all channels driven)
- Bridged @ 8 Ω
- 2 × 12,000 W
- Total output
- 24,000 W
- Mains
- 200–240 V switch-mode with PFC
Performance
- Frequency response
- 20 Hz – 20 kHz (±0.5 dB)
- THD+N
- < 0.05% @ 1 kHz
- S/N ratio
- > 112 dB (A-weighted)
- Damping factor
- > 400 @ 8 Ω
Connections
- Inputs / outputs
- 4 × XLR in · 4 × NL4 speakON out
- Input sensitivity
- 0 dBu / 6 dBu selectable
Physical
- Format
- 19″ 2U rack
- Net weight2
- 14 kg / 31 lb
Environment
- Operating temperature
- −10 °C to +40 °C continuous, +50 °C short term
- Storage temperature
- −20 °C to +70 °C
- Humidity
- < 70% relative humidity, non-condensing
Measurement conditions
- Nominal impedance is the manufacturer's rating for amplifier load calculation; minimum impedance across the operating band may be lower.
- Net weight excludes packaging, flight case, accessories and optional rigging hardware.
- All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.
Downloads
Product documentation, free to open. No registration, no form. The data sheet is a PDF rendered from the page below it; the manual is a print page, so use your browser to print it or save it as PDF.
- Technical data sheetFull specification set with the measurement conditions for each figure, modelled response curves, safety notices and warranty terms.PDF · SS-DS-A34X-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
- Technical data sheet, in your browserThe same document as a page, if you would rather read it here or print it yourself.HTML print view · SS-DS-A34X-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
- Architectural and engineering specificationThe “shall be” paragraph for tender documents and bills of quantities, written from this product’s own specification rows. Section of the data sheet.HTML section · SS-DS-A34X-EN-A4
- User manualUnpacking, connection, installation, operating limits, maintenance schedule and troubleshooting for this model.HTML print view · SS-UM-A34X-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
Loudspeaker data files for prediction software (GLL and CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Email support@s-soundspro.com and we will send the current release for this model.
More from the SSOUNDS amplifier range
SSOUNDS
SSOUNDS D34X
Coming soon. 4-channel networked DSP amplifier, 4 × 3,000 W at 8 Ω, Dante, AES3 and analog in.
SSOUNDS
SSOUNDS D24X
High-power 4-channel DSP amplifier, subwoofer-grade output with full FIR processing.
SSOUNDS
SSOUNDS D14X
4-channel DSP amplifier with FIR, line-array power plus full system processing and presets.
SSOUNDS
SSOUNDS A24X
High-power 4-channel subwoofer amplifier, 4 × 4,400 W @ 4 Ω for XTO sub arrays.
SSOUNDS
SSOUNDS A14X
4-channel touring amplifier for line arrays, 4 × 2,000 W @ 4 Ω, analog input.