What is the best speaker for a conference room in Buenos Aires?

Conference room audio is a speech intelligibility problem, not a music problem. The priorities are consistent coverage across every seat, controlled directivity to keep energy off tables and glass, and enough headroom for video calls and live discussion. SSOUNDS approaches this with installed loudspeaker ranges designed for exactly these conditions: ceiling loudspeakers for low-profile distributed coverage, slim columns for rooms with hard reflective surfaces, and point-source boxes where a small number of higher-output positions is preferred.

For most conference rooms, SSOUNDS CL6 and CL8 ceiling loudspeakers are the right starting point. They sit flush in the ceiling, provide even coverage at low SPL per unit, and reduce the level differences that make speech hard to follow. In rooms with glass walls, high ceilings or heritage interiors where ceiling work is restricted, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers mount on the wall and use vertical line source behaviour to steer speech at the listeners and away from reflective planes. Where a room needs more output from fewer positions, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers and M series point-source boxes and subwoofers cover that requirement, with the T models running on 70/100 V line for long cable runs and simple multi-speaker distribution.

Sizing follows the room, not a rule of thumb. Map the seating area, decide whether coverage should be distributed (ceiling) or directional (column or point source), then set the SPL target for speech and confirm the box count and spacing in prediction software before anything is ordered. SSOUNDS A series networked amplifiers with DSP and Dante handle routing, EQ, delay and limiting, and integrate with beamforming microphones and echo cancellation so that the loudspeaker system and the conferencing platform behave as one. One-touch control is then a control-system task, with presets for presentation, video call and discussion.

SSOUNDS designs and installs across Buenos Aires, with engineering support from our UK and European teams and our offices in Nigeria, Ghana and West Africa. We ship and support internationally from those bases. For a conference room project, share the room dimensions, seating layout, ceiling type and conferencing platform, and we will specify the right combination of ceiling, column or point-source loudspeakers with the matching amplification and DSP.