What is the best speaker for a school in Ukraine?

Schools need speech clarity for young listeners, even coverage, and simple control. In classrooms and corridors, ceiling loudspeakers such as the SSOUNDS CL6 and CL8 are ideal: they mount flush, are tamper-resistant, and run on a 70/100 V line for long cable runs and easy paging. For assembly halls, slim column loudspeakers like the LC8.2 and LC16.2 provide tight vertical coverage that keeps sound off the walls and ceiling, improving intelligibility. In sports halls, where reverberation is high and mounting points are limited, point-source boxes from the SSOUNDS P series (P4, P5, P6T, P10T, P12T) or M series, often with subwoofers for music, deliver the required SPL and pattern control. T models operate on 70/100 V lines, simplifying distributed systems.

Selection starts with the room. Measure length, width, and height, and note surface materials. For speech, aim for a coverage angle that places direct sound on the listeners and avoids early reflections. Ceiling loudspeakers suit rooms with low ceilings (under 4 m) and require spacing based on ceiling height and desired uniformity, typically 1 to 1.5 times the ceiling height above ear level. Columns work well in halls with high ceilings, mounted at 2.5 to 3.5 m, with the bottom of the column aimed at the last row. Point-source boxes are for large, reverberant spaces; use their controlled directivity to hit the audience and not the walls. Always use amplifiers with DSP, such as the SSOUNDS A series networked amplifiers with Dante, to apply EQ, limiting, and delay for each zone.

Sizing is about SPL and coverage, not just box count. For classrooms, target 70 to 75 dB SPL with 6 to 10 dB headroom for speech. For assembly halls, 85 to 90 dB SPL is typical, with higher peaks for music. Sports halls may need 95 dB SPL or more. Calculate the number of loudspeakers from the room volume and the loudspeaker's sensitivity and maximum SPL. Use the SSOUNDS prediction tools to model coverage and avoid dead spots or excessive overlap. Keep the system simple: wall controllers for volume and source selection, and a clear zone plan. Tamper-resistant grilles and mounts are essential in schools.

SSOUNDS designs and installs across Ukraine, with engineering support from our UK and European bases. We provide system design, coverage prediction, and commissioning guidance for schools, houses of worship, stadiums, and hotels. Our install range includes ceiling, column, point-source, and line array loudspeakers, plus networked amplifiers and DSP. For a school project, contact us with your room dimensions and requirements, and we will recommend the right combination of SSOUNDS products and assist with the design.