What is the best speaker for an office in Harare?

Office audio is not about high SPL. It is about consistent, low level coverage, speech intelligibility for paging, and sound masking that raises the ambient noise floor so conversations do not carry. The right approach is a distributed system: many ceiling loudspeakers on a 70/100 V line, each covering a small area at low level, rather than a few large boxes running loud. SSOUNDS CL6 and CL8 ceiling loudspeakers are designed for exactly this. They mount flush in standard ceiling grids, run on 70/100 V lines for long cable runs with low loss, and can be tapped at different power levels to balance zones.

For open plan offices, ceiling loudspeakers on a tight grid give the most even coverage. As a rule of thumb, space ceiling loudspeakers at roughly 1.5 to 2 times the ceiling height above the listening plane for background music, and closer for paging and masking. In meeting rooms, use the same ceiling type or SSOUNDS LC8.2 or LC16.2 slim column loudspeakers where a ceiling is not available or where you need tighter vertical control to keep sound off the walls. For larger atria, reception areas or divisible rooms, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers or M series point source boxes and subwoofers can be added, with T models running on 70/100 V lines.

Every zone should be independently controllable. SSOUNDS A series networked amplifiers with DSP and Dante let you route paging, background music and masking to separate zones, set EQ and delay per zone, and monitor the system over the network. This is what makes an office system practical: reception can have different content from the open plan floor, and meeting rooms can have local control or mute. Sound masking is best delivered through the same ceiling loudspeakers with a dedicated low level noise source, tuned to the space, so it blends with the HVAC and does not draw attention.

SSOUNDS designs and installs across Harare. Our engineers model the space, predict coverage and intelligibility, and specify the right mix of ceiling, column and point source loudspeakers with networked amplification. We work with system integrators, consultants and facilities teams to deliver offices that sound consistent, page clearly and mask speech effectively, without over specifying the system.