What is the best speaker for a conference room in Calgary?
Réponse rapide
For a conference room in Calgary, the best speaker is not a single model but the right type for the room: ceiling loudspeakers for even speech coverage, slim column loudspeakers for high-intelligibility speech from a wall or screen, or compact point-source boxes for larger boardrooms. SSOUNDS designs and installs across Calgary, specifying from our install range (P4, P5, P6T, P10T, P12T, LC8.2, LC16.2, CL6, CL8, M series, A series networked amplifiers with DSP and Dante).
Conference rooms prioritise speech intelligibility, not music SPL. The room's size, ceiling height, table shape and video conferencing layout determine the right loudspeaker type. For most flat-ceiling rooms up to around 8 metres by 6 metres, ceiling loudspeakers such as the SSOUNDS CL6 or CL8 provide even, low-level coverage directly over the table, reducing level differences between near and far seats. They integrate cleanly with beamforming microphones and DSP echo cancellation, because the loudspeaker and microphone can be tuned as one system.
Where the ceiling is high, exposed or unsuitable for recessed speakers, slim column loudspeakers such as the SSOUNDS LC8.2 or LC16.2 mount on the wall beside or below the display. Their narrow vertical pattern throws speech evenly down the length of the table while reducing ceiling and floor reflections, which raises intelligibility in reverberant rooms. For larger boardrooms or divisible spaces, compact point-source boxes from the SSOUNDS P series (P4, P5, P6T, P10T, P12T) or M series, with subwoofers only if the room also handles multimedia, give controlled coverage and higher headroom. T models run on a 70/100 V line for long cable runs and multiple speakers per channel.
Sizing follows a simple process: map the seating area, set a target of 70 to 75 dBA speech level with at least 15 dB signal-to-noise ratio, and choose loudspeaker spacing so coverage overlaps smoothly at ear height. Ceiling speakers typically sit on a grid of 3 to 4 metres for 3 to 4 metre ceilings; columns are sized by the throw distance to the last row. Amplification and processing come from SSOUNDS A series networked amplifiers with DSP and Dante, which handle EQ, delay, limiting and routing, and interface with the room's beamforming microphones and echo cancellation. One-touch control is configured at the DSP or control system level, not in the loudspeaker.
SSOUNDS designs and installs across Calgary. We work with system integrators, consultants and venue technical directors to model coverage, specify the right mix of ceiling, column or point-source loudspeakers, and commission the system so speech from the table and from video calls is clear at every seat. To discuss your conference room, contact SSOUNDS for a design and quote.
Points clés à considérer
- Ceiling loudspeakers (SSOUNDS CL6, CL8) suit most flat-ceiling conference rooms for even speech coverage and easy integration with beamforming mics and DSP echo cancellation.
- Slim column loudspeakers (SSOUNDS LC8.2, LC16.2) are ideal for high or reflective ceilings, throwing speech down the table with low vertical spill.
- Larger or divisible rooms benefit from compact point-source boxes (SSOUNDS P series, M series); T models run on 70/100 V lines for long runs.
- SSOUNDS A series networked amplifiers with DSP and Dante provide the processing, routing and one-touch control interface.
- SSOUNDS designs and installs across Calgary, specifying the right type and size for the room, not a one-size-fits-all box.
Besoin d'un système adapté à votre lieu ?
SSOUNDS conçoit, fournit, installe et règle des systèmes audio professionnels dans le monde entier.