Ni spika gani bora kwa uwanja wa ndege huko Lusaka?
Jibu la haraka
For an airport in Lusaka, the right speaker choice depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for large reverberant halls like check-in and baggage reclaim, and P series or M series point-source boxes for high-ceiling areas and outdoor zones. All must integrate with EN 54 / BS 5839-8 voice alarm and PA, with zoned paging, line supervision, and redundant amplification.
Airports demand intelligible voice alarm and public address that meets EN 54 and BS 5839-8 standards, especially in large reverberant halls where speech must remain clear. SSOUNDS install range covers this: ceiling loudspeakers (CL6, CL8) for low ceilings and offices, slim column loudspeakers (LC8.2, LC16.2) for spaces with high ceilings and hard surfaces, and point-source boxes (P4, P5, P6T, P10T, P12T) or M series for high-SPL areas and outdoor zones. The T models operate on 70/100 V lines for long cable runs and easy zoning.
Selection starts with the acoustic environment. In check-in halls and baggage reclaim, where reverberation times are long, column loudspeakers like the LC8.2 or LC16.2 provide tight vertical coverage and reduce unwanted reflections, improving STI. For concourses and retail areas with lower ceilings, CL6 or CL8 ceiling loudspeakers offer even coverage and discreet installation. In large open spaces or piers with high ceilings, P series or M series point-source boxes deliver higher SPL and controlled dispersion. Outdoor areas such as aprons or car parks may need weather-resistant M series boxes.
Sizing and zoning are critical. Each zone should have its own amplifier channel or networked audio channel, with SSOUNDS A series networked amplifiers providing DSP and Dante for flexible routing and redundancy. Line supervision and redundant amplifiers ensure the system remains operational during emergencies. The number of loudspeakers per zone depends on ceiling height, target SPL, and intelligibility requirements; a common approach is to use ceiling loudspeakers at 2 to 4 times the ceiling height spacing for even coverage, while columns are placed to cover specific areas without overlap. SSOUNDS engineers use AI-assisted acoustic modeling to predict coverage and STI before installation.
SSOUNDS designs and installs across Lusaka, with support from our offices in the United Kingdom, United States, Nigeria, Ghana, and West Africa. We work with system integrators, consultants, and airport technical directors to specify the right mix of SSOUNDS loudspeakers and amplifiers, ensuring compliance and performance. For a tailored design, contact us to discuss your project.
Mambo muhimu ya kuzingatia
- Use CL6/CL8 ceiling loudspeakers for concourses and offices, LC8.2/LC16.2 columns for reverberant halls, and P/M series for high ceilings and outdoor zones.
- T models (P6T, P10T, P12T) run on 70/100 V lines for long cable runs and simple zoning.
- A series networked amplifiers with DSP and Dante provide zoning, line supervision, and redundancy for EN 54 / BS 5839-8 compliance.
- SSOUNDS engineers use AI-assisted modeling to predict STI and coverage before installation.
- SSOUNDS designs and installs across Lusaka, with support from our UK, US, Nigeria, Ghana, and West Africa offices.
Unahitaji mfumo sahihi uliobainishwa kwa ajili ya ukumbi wako?
SSOUNDS inabuni, inasambaza, inaweka na kurekebisha AVL ya kitaalamu duniani kote.