Ni spika gani bora kwa uwanja wa ndege huko Manama?
Jibu la haraka
For an airport in Manama, the right speaker depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P series or M series point-source boxes for large open zones. All are driven by SSOUNDS A series networked amplifiers with DSP and Dante, and the system must be designed for EN 54 / BS 5839-8 voice alarm and public address, with line supervision and redundant amplification.
Airports in Manama combine large reverberant halls, high ambient noise and strict life-safety requirements. The priority is intelligibility: speech must be clear in every zone, from check-in to gates, and the system must meet EN 54 and BS 5839-8 for voice alarm and public address. That means zoned paging, line supervision, redundant amplifiers and loudspeakers selected for controlled coverage rather than raw output.
SSOUNDS install range covers every airport zone. CL6 and CL8 ceiling loudspeakers suit low-ceiling concourses, lounges and back-of-house areas where discreet, even coverage is needed. LC8.2 and LC16.2 slim column loudspeakers are the right choice for reverberant halls, gate areas and long corridors: their narrow vertical pattern keeps sound on the listeners and away from reflective surfaces, which raises STI. For large open zones, P4, P5, P6T, P10T and P12T install loudspeakers provide higher SPL and controlled coverage; the T models run on a 70/100 V line for long cable runs and easy zoning. M series point-source boxes and subwoofers handle very large spaces or high-energy areas where music and announcements must both be clear.
Selection and sizing follow a clear process. First, define the coverage and SPL target for each zone from the acoustic model. Second, choose the loudspeaker type by ceiling height and reverberation: ceiling models for low, absorptive spaces, columns for tall, reflective halls, point-source boxes for large volumes. Third, set the 70/100 V line taps so each zone reaches the required level with headroom. Fourth, use SSOUNDS A series networked amplifiers with DSP and Dante for routing, EQ, delay and supervision, with redundant amplifiers on critical voice alarm zones. Finally, commission with STI measurement to confirm the design meets the standard.
SSOUNDS designs and installs across Manama, with engineering support from our UK, US, Nigeria and Ghana bases. We ship and support internationally, and we can advise on the right configuration for your terminal. Contact us to discuss your project and request a quote.
Mambo muhimu ya kuzingatia
- Use CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and offices.
- Use LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas to improve STI.
- Use P series (P4, P5, P6T, P10T, P12T) or M series point-source boxes for large open zones and high SPL.
- Drive the system with SSOUNDS A series networked amplifiers with DSP and Dante, with redundant amplifiers on voice alarm zones.
- Design to EN 54 and BS 5839-8 with line supervision, zoned paging and STI verification.
Unahitaji mfumo sahihi uliobainishwa kwa ajili ya ukumbi wako?
SSOUNDS inabuni, inasambaza, inaweka na kurekebisha AVL ya kitaalamu duniani kote.