What is the best speaker for an airport in Glasgow?
Hızlı yanıt
For an airport in Glasgow, the right speaker choice depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low, even coverage in concourses and lounges, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers for larger zones and high ceilings. All are driven by SSOUNDS A series networked amplifiers with DSP and Dante, with line supervision and redundancy to meet EN 54 and BS 5839-8 voice alarm requirements.
Airports present a unique acoustic challenge: large, reverberant halls with high ambient noise from aircraft, announcements and crowds. The primary goal is speech intelligibility, measured as STI, which must meet EN 54 and BS 5839-8 standards for voice alarm and public address. SSOUNDS approaches this by selecting loudspeakers that deliver controlled, even coverage with minimal overlap and reverberant energy. For low ceilings in concourses, lounges and retail areas, SSOUNDS CL6 and CL8 ceiling loudspeakers provide discreet, uniform coverage. In spaces with high ceilings or long reverberation times, such as check-in halls and gate areas, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers offer tightly controlled vertical dispersion, directing sound at listeners and away from reflective surfaces.
For larger zones, including baggage claim, departure lounges and outdoor covered walkways, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers deliver higher SPL and longer throw. The T models operate on 70/100 V lines, which simplifies long cable runs and allows multiple loudspeakers per amplifier channel. Where music and paging require full-range performance, SSOUNDS M series point-source boxes and subwoofers can be added. All systems are powered by SSOUNDS A series networked amplifiers with onboard DSP and Dante, enabling zoned paging, line supervision and redundant amplifier configurations as required by EN 54. The DSP allows precise equalisation and delay to optimise intelligibility across each zone.
Selection and sizing start with a site survey: room dimensions, surface finishes, ambient noise levels and required STI. SSOUNDS engineers use AI-assisted acoustic modelling to predict coverage and intelligibility before installation, ensuring the design meets the standard without over-specifying. For example, a check-in hall might use LC16.2 columns mounted at height to cover seating areas, while ceiling loudspeakers fill the perimeter. Amplifier channels are allocated with redundancy, and all loudspeaker lines are supervised for fault detection. SSOUNDS designs and installs across Glasgow, with support from our UK base, and we can provide a tailored solution for your airport project.
Dikkat edilmesi gereken temel noktalar
- Use SSOUNDS CL6 or CL8 ceiling loudspeakers for low ceilings and even coverage in concourses and lounges.
- Use SSOUNDS LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and high ceilings to control dispersion and improve STI.
- Use SSOUNDS P4, P5, P6T, P10T or P12T install loudspeakers for larger zones and higher SPL; T models run on 70/100 V lines.
- Power with SSOUNDS A series networked amplifiers with DSP and Dante for zoned paging, line supervision and redundancy.
- SSOUNDS designs and installs across Glasgow, meeting EN 54 and BS 5839-8 voice alarm standards.
Mekanınız için doğru sistemin belirlenmesine ihtiyacınız mı var?
SSOUNDS profesyonel AVL sistemlerini dünya çapında tasarlar, tedarik eder, kurar ve akort eder.