What is the best speaker for a hotel in Utah?

A hotel is not one acoustic space but many, each with its own requirements. Lobbies and corridors need even, low level background music and clear paging, which calls for ceiling loudspeakers such as the SSOUNDS CL6 and CL8. Restaurants and bars often have hard reflective surfaces and low ceilings, so slim column loudspeakers like the LC8.2 and LC16.2 deliver controlled vertical coverage that keeps sound on the guests and off the walls. Ballrooms and conference rooms need higher SPL, longer throw and full range music capability, which is where SSOUNDS P series install loudspeakers (P4, P5, P6T, P10T, P12T) and M series point source boxes and subwoofers come in. The T models run on a 70/100 V line for long cable runs and multiple taps, while the non T models suit low impedance operation where higher output is needed.

Selection starts with the room, not the box. For a ballroom, define the coverage area, the required SPL at the back row and the programme material (speech, recorded music or live band). A distributed ceiling system may suffice for speech only, but a portable or installed PA with left and right clusters plus subwoofers will be needed for music and presentations. For conference rooms, aim for high speech intelligibility with low visual impact, often using column loudspeakers or discreet ceiling models. In spas and quiet areas, use low level ceiling loudspeakers with local volume control. The key is to keep zones separate on the network so each can have its own source and level.

All of this is tied together with SSOUNDS A series networked amplifiers with DSP and Dante. Dante allows each zone to be addressed independently, so paging can override background music in one area without affecting others. The onboard DSP provides EQ, delay and limiting for each speaker type, and the network allows central control and monitoring. SSOUNDS designs and installs across Utah, working with hotel technical directors, consultants and integrators from initial acoustic modeling and coverage prediction through to commissioning. We do not publish prices because system cost depends on zone count, room volumes, SPL targets, box count, amplification, rigging and installation. To get an accurate proposal, contact SSOUNDS with your floor plans and requirements.