What is the best speaker for an office in Lagos?

Office audio in Lagos must deliver three things reliably: consistent background music, clear paging, and effective sound masking across open-plan and meeting spaces. The building itself often brings high ceilings, glass partitions and ambient noise from generators or traffic, so loudspeaker choice and placement matter more than raw power. SSOUNDS install loudspeakers are engineered for exactly this: the CL6 and CL8 ceiling models provide wide, even coverage at low levels, while the P4, P5, P6T, P10T and P12T (T models on 70/100 V lines) offer flexible surface-mount options for areas without ceiling voids.

For open-plan offices, ceiling loudspeakers on a 70/100 V line are the standard choice because they allow many units on one amplifier channel with simple tapping for level control. Space them for edge-to-edge coverage at ear height, typically every 4 to 6 metres in a grid, and keep SPL low (around 70 to 75 dB) so music and masking blend without becoming intrusive. In meeting rooms, slim column loudspeakers like the LC8.2 or LC16.2 mounted vertically beside a display or on the wall deliver highly intelligible speech with minimal visual impact. Corridors and reception areas can use the same columns or compact point-source boxes from the M series for targeted paging.

Zoning is essential: separate open-plan areas, meeting rooms, reception and back-of-house so paging can be routed only where needed and music levels adjusted per zone. SSOUNDS A series networked amplifiers with DSP and Dante provide the processing, routing and zone control, and they integrate with standard control systems. For sound masking, use the same ceiling loudspeakers with a dedicated masking signal generator or DSP preset, tuned to the space's noise floor. SSOUNDS designs and installs across Lagos, with engineering support from our UK, US and West Africa bases, so systems are specified, commissioned and supported locally.

Selection and sizing should always follow a site survey: room dimensions, ceiling height and type, partition layout, noise sources and required paging intelligibility. As a rule, more loudspeakers at lower level beats fewer loudspeakers driven hard, especially for masking and music. SSOUNDS engineers use AI-assisted acoustic modelling to predict coverage and speech intelligibility before installation, ensuring the system meets the brief without over-specifying. For a quote or design assistance, contact SSOUNDS with your floor plans and requirements.