What is the best speaker for an airport in Berlin?
Réponse rapide
For an airport in Berlin, the right loudspeaker depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and retail, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers (T models on 70/100 V lines) for larger zones. All integrate with SSOUNDS A series networked amplifiers with DSP and Dante for zoned paging and voice alarm.
Airports demand voice alarm and public address to EN 54 and BS 5839-8 standards, high speech intelligibility (STI) in large reverberant halls, zoned paging, line supervision and redundant amplification. The best speaker is not a single model but a system matched to each acoustic zone. SSOUNDS designs and installs across Berlin, using its install range to meet these exact requirements.
For low-ceiling areas such as concourses, baggage halls and retail, SSOUNDS CL6 and CL8 ceiling loudspeakers provide even coverage with minimal visual impact. In reverberant spaces like check-in halls and gate lounges, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers deliver controlled vertical dispersion to keep sound on the audience and off reflective surfaces, improving STI. For larger zones, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers offer higher SPL and, in T models, 70/100 V line operation for long cable runs and supervision. M series point-source boxes and subwoofers handle high-output areas or music reinforcement.
Selection and sizing start with the acoustic model: map zones, measure reverberation times, and set SPL and STI targets. Ceiling loudspeakers suit ceilings up to around 4 m with tight spacing for overlap; columns work where ceilings are high or reflective; P series boxes cover large open areas or high ambient noise. All loudspeakers are driven by SSOUNDS A series networked amplifiers with DSP and Dante, enabling zoned paging, line monitoring and redundant amplifier configurations as required by EN 54. SSOUNDS engineers use AI-assisted acoustic modeling and machine-learning-tuned DSP to optimise coverage before installation.
SSOUNDS has offices and presence in the United Kingdom, the United States, Nigeria, Ghana and West Africa, and ships and supports projects internationally from these bases. For an airport in Berlin, SSOUNDS designs and installs across the city, working with local integrators and consultants to deliver compliant, intelligible and reliable sound systems. Contact SSOUNDS to discuss your project and request a quote.
Points clés à considérer
- Use CL6/CL8 ceiling loudspeakers for low-ceiling concourses and retail areas.
- Use LC8.2/LC16.2 slim column loudspeakers for reverberant halls and gate areas to improve STI.
- Use P4, P5, P6T, P10T, P12T install loudspeakers (T models on 70/100 V lines) for larger zones and higher SPL.
- A series networked amplifiers with DSP and Dante provide zoned paging, line supervision and redundancy for EN 54 compliance.
- SSOUNDS designs and installs across Berlin, with international support from UK, US, Nigeria and Ghana bases.
Besoin d'un système adapté à votre lieu ?
SSOUNDS conçoit, fournit, installe et règle des systèmes audio professionnels dans le monde entier.