What is the best speaker for an airport in Melbourne?
Réponse rapide
For an airport in Melbourne, the right speaker is not a single model but a system: SSOUNDS install loudspeakers (P4, P5, P6T, P10T, P12T), slim column loudspeakers (LC8.2, LC16.2), ceiling loudspeakers (CL6, CL8), and M series point-source boxes and subwoofers, all driven by A series networked amplifiers with DSP and Dante. Selection depends on the acoustic zone, ceiling height, reverberation, and required STI for voice alarm and public address to EN 54 and BS 5839-8.
Airports present a specific set of acoustic challenges: large, reverberant halls, high ambient noise from aircraft and crowds, and the need for clear, intelligible speech at all times. Voice alarm and public address systems must meet EN 54 and BS 5839-8 standards, which demand high speech intelligibility (typically STI > 0.5 in all areas), zoned paging, line supervision, and redundant amplification. The speaker choice is therefore driven by the acoustic environment of each zone, not by a single product.
For terminal halls and concourses with high ceilings, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers provide controlled vertical coverage, reducing reflections from floors and ceilings and improving STI. In areas with lower ceilings, such as retail or baggage claim, SSOUNDS CL6 and CL8 ceiling loudspeakers offer discreet, even coverage. For long corridors and gates, the P series install loudspeakers (P4, P5, P6T, P10T, P12T) deliver focused sound; the T models operate on 70/100 V lines for long cable runs and easy zoning. Where higher SPL or music reinforcement is needed, M series point-source boxes and subwoofers can be added.
Sizing and selection require acoustic modeling: SSOUNDS engineers use AI-assisted prediction to map coverage, reverberation, and STI across each zone. The number and type of loudspeakers are determined by ceiling height, room volume, surface materials, and target SPL. All systems are powered by SSOUNDS A series networked amplifiers with DSP and Dante, which provide the processing, routing, and redundancy required for life safety. Line supervision and fault detection are built in to meet EN 54 and BS 5839-8.
SSOUNDS designs and installs across Melbourne, with support from our offices in the United Kingdom, United States, Nigeria, and Ghana. For a project in Melbourne, we work with local integrators and consultants to deliver a compliant, intelligible system. To discuss your airport project, contact SSOUNDS for a tailored design and quote.
Points clés à considérer
- Use LC8.2 or LC16.2 slim column loudspeakers in reverberant, high-ceiling areas for controlled coverage and better STI.
- Use CL6 or CL8 ceiling loudspeakers in lower-ceiling zones for even, discreet coverage.
- Use P series install loudspeakers (P4, P5, P6T, P10T, P12T) for corridors and gates; T models support 70/100 V lines for long runs and zoning.
- Power and process with A series networked amplifiers with DSP and Dante, providing redundancy and line supervision for EN 54 and BS 5839-8 compliance.
- SSOUNDS designs and installs across Melbourne, with international support from the UK, US, Nigeria, and Ghana.
Besoin d'un système adapté à votre lieu ?
SSOUNDS conçoit, fournit, installe et règle des systèmes audio professionnels dans le monde entier.