What is the best speaker for an airport in New Jersey?
Réponse rapide
For an airport in New Jersey, the right speaker depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P series or M series point-source boxes for larger zones. All are supported by SSOUNDS A series networked amplifiers with DSP and Dante, designed for EN 54 and BS 5839-8 life safety and paging systems.
Airports demand more than background music. They need voice alarm and public address that meets EN 54 and BS 5839-8 standards, with high speech intelligibility (STI) in large, reverberant halls, zoned paging, line supervision and redundant amplification. The speaker choice must match the acoustic environment: ceiling loudspeakers for low ceilings and offices, columns for reverberant spaces with high ceilings, and point-source boxes for long-throw or high-SPL areas.
SSOUNDS install range covers these needs. The CL6 and CL8 ceiling loudspeakers suit concourses, retail and back-of-house areas where even coverage and discreet mounting are required. The LC8.2 and LC16.2 slim column loudspeakers are ideal for gate lounges, security halls and terminals with hard surfaces, because their controlled vertical coverage reduces reflections and improves STI. For larger zones, such as baggage claim or outdoor covered walkways, the P4, P5, P6T, P10T and P12T install loudspeakers (T models run on 70/100 V lines) and M series point-source boxes and subwoofers provide higher SPL and longer throw.
Selection and sizing start with the space: measure ceiling height, reverberation time and ambient noise, then define the required STI and SPL for life safety. Use ceiling models for ceilings up to about 4 m, columns for 4 to 8 m with high reverberation, and point-source boxes for longer distances or higher output. Zone the system to match airport operations, for example separate zones for each gate, concourse, and baggage area. SSOUNDS A series networked amplifiers with DSP and Dante handle routing, equalisation, delay and supervision, with redundant amplifiers for critical zones.
SSOUNDS designs and installs across New Jersey, with support from our offices in the United Kingdom, United States, Nigeria and Ghana. We work with system integrators, consultants and airport technical directors to specify the right mix of ceiling, column and point-source loudspeakers, ensuring compliance and intelligibility. For a tailored design, contact SSOUNDS with your floor plans and performance requirements.
Points clés à considérer
- Ceiling loudspeakers (CL6, CL8) for concourses, offices and low-ceiling areas.
- Slim column loudspeakers (LC8.2, LC16.2) for reverberant halls and gate areas to improve STI.
- Point-source boxes (P series, M series) for long-throw and high-SPL zones.
- A series networked amplifiers with DSP and Dante for zoned paging, supervision and redundancy.
- SSOUNDS designs and installs across New Jersey, with international support from the UK, US, Nigeria and Ghana.
Besoin d'un système adapté à votre lieu ?
SSOUNDS conçoit, fournit, installe et règle des systèmes audio professionnels dans le monde entier.