애리조나의 공항에 가장 적합한 스피커는 무엇인가요?
빠른 답변
For an airport in Arizona, the right speaker depends on the space: SSOUNDS CL6 and CL8 ceiling loudspeakers for low-ceiling concourses and offices, LC8.2 and LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers for larger spaces, all driven by A series networked amplifiers with DSP and Dante. SSOUNDS designs and installs these systems across Arizona, meeting EN 54 and BS 5839-8 voice alarm and PA requirements.
Airports in Arizona need voice alarm and public address that meet EN 54 and BS 5839-8 standards, with high speech intelligibility (STI) in large reverberant halls, zoned paging, line supervision and redundant amplification. The best speaker is not a single model but a system matched to each acoustic zone. SSOUNDS provides a complete install range: ceiling loudspeakers (CL6, CL8), slim column loudspeakers (LC8.2, LC16.2), install loudspeakers (P4, P5, P6T, P10T, P12T), point-source boxes and subwoofers (M series), and networked amplifiers with DSP and Dante (A series).
For low-ceiling areas such as concourses, retail and offices, SSOUNDS CL6 and CL8 ceiling loudspeakers offer discreet, even coverage. In reverberant spaces like check-in halls and gate lounges, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers provide controlled directivity to keep sound on the audience and off reflective surfaces, raising STI. For large open areas or high ceilings, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers deliver higher SPL and pattern control; the T models run on a 70/100 V line for long cable runs and easy zoning. M series point-source boxes and subwoofers handle music and paging in larger zones.
Selection and sizing start with the acoustic model: map background noise, reverberation time and coverage areas, then choose loudspeaker types and spacing to achieve the required STI. Use SSOUNDS A series networked amplifiers with DSP and Dante for flexible routing, line supervision and redundant amplification. All SSOUNDS systems are designed and installed across Arizona by our team, with support from our offices in the United Kingdom, United States, Nigeria and Ghana. For a tailored design, contact SSOUNDS with your floor plans and performance requirements.
핵심 고려 사항
- Match loudspeaker type to space: CL6/CL8 ceilings for low ceilings, LC8.2/LC16.2 columns for reverberant halls, P series for large areas.
- T models (P6T, P10T, P12T) run on 70/100 V lines for efficient zoning and long cable runs.
- A series amplifiers with DSP and Dante provide networked audio, line supervision and redundancy for EN 54 and BS 5839-8 compliance.
- SSOUNDS designs and installs across Arizona, with international support from the UK, US, Nigeria and Ghana.