What is the best speaker for an airport in Leicester?
빠른 답변
For an airport in Leicester, the right speaker depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low-ceiling concourses, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers for larger zones. All are backed by SSOUNDS A series networked amplifiers with DSP and Dante, and SSOUNDS designs and installs across Leicester.
Airports demand voice alarm and public address that meet EN 54 and BS 5839-8 standards, with high speech intelligibility (STI) in large, reverberant halls. The best speaker is not one model but the correct type for each acoustic zone. SSOUNDS install range covers ceiling, column, point-source and line array options, all designed for life safety and clear paging.
For low-ceiling areas such as check-in and baggage reclaim, SSOUNDS CL6 and CL8 ceiling loudspeakers provide even coverage with minimal visual impact. In tall, reflective spaces like departure lounges and security halls, LC8.2 and LC16.2 slim column loudspeakers deliver controlled vertical dispersion to keep sound on the audience and off reverberant surfaces. For larger zones, P4, P5, P6T, P10T and P12T install loudspeakers (T models run on 70/100 V lines) offer higher SPL and longer throw. M series point-source boxes and subwoofers handle music and high-energy paging where needed.
Selection and sizing start with the acoustic model: map the space, set the STI target (typically 0.50 or higher for airports), and choose loudspeaker types and spacing to achieve uniform coverage. Use SSOUNDS A series networked amplifiers with DSP and Dante for zoning, line supervision and redundant amplification. All SSOUNDS systems are designed and commissioned to meet the project's intelligibility and safety requirements.
SSOUNDS designs and installs across Leicester, with support from our UK base. For a tailored specification, contact us to discuss your airport project.
핵심 고려 사항
- Ceiling loudspeakers (CL6, CL8) for low-ceiling concourses and back-of-house.
- Slim column loudspeakers (LC8.2, LC16.2) for reverberant halls and gate areas.
- Install loudspeakers (P4, P5, P6T, P10T, P12T) for larger zones and higher SPL; T models for 70/100 V lines.
- M series point-source boxes and subwoofers for music and high-energy paging.
- A series networked amplifiers with DSP and Dante for zoning, supervision and redundancy.