Technical Data Sheet

Point Source Speakers

SSOUNDS

SS-P5

SSOUNDS P5

Name: SSOUNDS
Telephone: +44 20 3769 6537

Three-way 5″ install loudspeaker for wall and corner mounting, 120° × 90°, in a slim white aluminium cabinet.

P stands for Point Source.

At a glance

Model / SKU: SS-P5
Category: Point Source Speakers
Brand: SSOUNDS
Drive: Passive
Power: 150 W
Condition: New

Applications

installcommercialspeechfill

Overview

Meeting rooms, classrooms and shops often have one usable position: flat on a wall or tucked into a corner. The P5 is a three-way install cabinet built for exactly that. A 5″ low-frequency driver, four 3″ mid drivers and a 3″ high-frequency driver sit on angled faces of a slim aluminium cabinet, so the box carries its own aim and spreads 120° by 90° from 120 Hz to 18 kHz without a bracket to adjust. It handles 150 W at 8 Ω, reaches 120 dB at 1 m and connects on two Euroblock sockets. We specify it for meeting rooms, classrooms, retail, restaurants and corridors.

Three-way: 1 × 5″ LF, 4 × 3″ MF, 1 × 3″ HF
120° × 90° coverage
120 Hz to 18 kHz
95 dB sensitivity, 120 dB maximum SPL at 1 m
150 W rated power, 300 W recommended amplifier, 8 Ω
Slim aluminium cabinet for wall and corner mounting, 6.6 kg

Specifications

General

Type	Passive 3-way install loudspeaker, wall and corner mounting

Acoustic performance

Frequency response²	120 Hz – 18 kHz
Coverage⁴	120° (H) × 90° (V)
Maximum SPL¹	120 dB @ 1 m
Sensitivity³	95 dB (1 W @ 1 m)

Transducers & components

Low frequency	1 × 5″ driver
Mid frequency	4 × 3″ drivers
High frequency	1 × 3″ driver

Electrical

Rated power	150 W
Recommended amplifier power⁵	300 W into 8 Ω
Nominal impedance⁶	8 Ω

Connectors & I/O

Connectors

2 × Euroblock

Rigging & mounting

Mounting

Wall or corner, angle built into the cabinet

Physical & construction

Dimensions (H × W × D)⁸	518 × 260 × 260 mm
Net weight⁷	6.6 kg / 15 lb
Enclosure	Aluminium, painted · baked-paint steel grille

Notes

1.Maximum SPL is the peak level at 1 m, driven with pink noise at crest factor 4 to the clipping point of the recommended amplifier, with the SSOUNDS system preset applied. Full-range enclosures are specified under free-field conditions; figures marked half-space are specified over a reflecting plane, the condition subwoofers are deployed in, which adds approximately 6 dB.
2.Frequency response is specified on axis at 1 m in a free field. The tolerance the figure is referenced to is stated alongside it; where no tolerance is given, the figure is the −6 dB bandwidth.
3.Sensitivity is specified at 1 W into the nominal impedance at 1 m on axis, averaged across the pass band of the enclosure.
4.Coverage angles are nominal −6 dB values averaged across the pass band. Per-octave directivity data is available from SSOUNDS system design support for prediction and modelling.
5.Recommended amplifier power is the amplifier output SSOUNDS specifies for this enclosure, driven with the SSOUNDS system preset. It guides amplifier selection and is not an AES power-handling rating for the transducers.
6.Nominal impedance is the manufacturer's rating for amplifier load calculation; minimum impedance across the operating band may be lower.
7.Net weight excludes packaging, flight case, accessories and optional rigging hardware.
8.Dimensions are stated in millimetres and exclude protruding rigging hardware, handles and connector panels unless noted.
9.All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.

Response

Frequency response

Frequency response: 120 Hz to 18 kHz (−6 dB) · 1/24-octave smoothed

Horizontal beamwidth

−6 dB horizontal beamwidth: 120° nominal

Plot conditions. Curves are generated by the SSOUNDS engineering toolchain from this product's specification. Frequency response is shown 1/24-octave smoothed, normalised to the midband reference, with the passband corners at the stated tolerance; response varies within ±1 dB across the passband with a subtle shelf in the top octave. Magnitude slopes are 24 dB/octave beyond the passband corners. The beamwidth curve shows the −6 dB included angle: nominal coverage holds down to the pattern-control limit set by the cabinet width (f ≈ c/w) and widens below it.

Directivity (isobars / balloon). Measured directivity data (isobars, balloon and GLL/CLF for EASE) is in preparation. We publish measured polars only. Contact us for the current measurement status of this model.

Downloads & data files

SSOUNDS P5: User Manualmanual

Loudspeaker data files for prediction software (GLL / CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Contact support@s-soundspro.com and we will send the current release for this model.

Architectural & engineering specification

The processor shall be of the SSOUNDS P5 type, configured as a passive 3-way install loudspeaker, wall and corner mounting. The processor shall incorporate a low-frequency section of 1 × 5″ driver, a mid-frequency section of 4 × 3″ drivers, a high-frequency section of 1 × 3″ driver. The processor shall be capable of meeting the following performance criteria: a frequency response of 120 Hz – 18 kHz; a maximum sound pressure level of 120 dB @ 1 m; a sensitivity of 95 dB (1 W @ 1 m); nominal coverage of 120° (H) × 90° (V). Electrically the processor shall provide a power rating of 150 W, a nominal impedance of 8 Ω. Connection shall be by 2 × Euroblock. The processor shall be constructed of Aluminium, painted, baked-paint steel grille, measuring 518 × 260 × 260 mm, and shall weigh 6.6 kg / 15 lb. Rigging provision shall be Wall or corner, angle built into the cabinet. The processor shall be covered by the manufacturer's two (2) year limited warranty and shall be supplied by SSOUNDS or an SSOUNDS-authorised distributor. No alternate shall be accepted without prior written approval of the consultant or specifying engineer.

Safety & compliance

Read this section before specifying, installing or operating this product. It summarises the safety requirements set out in full in the product documentation supplied with the unit; where the two differ, the product documentation takes precedence.

Suspension & rigging: Overhead suspension is potentially hazardous and must be carried out only by trained and competent personnel using SSOUNDS-approved hardware, within the working load limits and array configurations published in the relevant SSOUNDS rigging documentation. Never exceed the stated number of enclosures per array or the stated splay limits. Inspect all rigging components, pins and retaining clips before every deployment and withdraw from service any component that is deformed, corroded or of unknown history. Secondary safety attachment is required where local regulation calls for it. SSOUNDS accepts no liability for systems suspended using non-approved hardware or outside published limits.
Sound pressure level & hearing: This equipment is capable of producing sound pressure levels that cause permanent hearing damage. Do not operate at high level in close proximity, and ensure that operators, performers and audience exposure complies with applicable occupational noise-exposure regulation. Provide hearing protection where exposure limits may be exceeded.
Environment & mechanical: Unless a published IP rating states otherwise, this product is intended for indoor use or for outdoor use under cover, and must be protected from rain, standing water and prolonged direct sun. Ensure ventilation openings are unobstructed. Stack, pole-mount and transport only as described in the product documentation, and secure the product against toppling wherever the public has access.
Disposal: At end of life, dispose of the product and any packaging in accordance with local regulation for electrical and electronic equipment. Do not dispose of electronic components in general waste.

Limited warranty: two (2) years

SSOUNDS products are warranted against defects in materials and workmanship for a period of two (2) years from the original date of purchase by the end user. Within that period SSOUNDS will, at its option, repair or replace the defective item with no charge for parts or labour. The item must be adequately packaged and dispatched, carriage pre-paid, to SSOUNDS or an SSOUNDS-authorised service centre, accompanied by proof of purchase and a returns reference issued in advance by SSOUNDS. Unauthorised repair, modification or removal of serial-number labelling voids this warranty.

This warranty does not cover

Cosmetic wear, finish, grille cloth, paintwork and consumable parts.
Damage caused by misuse, abuse, accident, neglect, or operation outside the published ratings on this sheet.
Damage caused by transport or handling after delivery, or by inadequate packaging on return.
Damage caused by mains or generator supply faults (over-voltage, under-voltage, phase imbalance, surge or incorrect earthing) or by lightning.
Water, dust or corrosion ingress on products not carrying a published IP rating for the conditions of use.
Damage resulting from amplification or processing outside the recommended configuration on this sheet, or from third-party presets.
Products not purchased from SSOUNDS or an SSOUNDS-authorised distributor.

This warranty is in addition to, and does not affect, any statutory rights the purchaser may have under applicable consumer law. It is the sole warranty offered; no other warranty, express or implied, is given.

Warranty claims and returns references: support@s-soundspro.com · +44 20 3769 6537

Legal notice

All information on this data sheet is subject to change without notice. SSOUNDS reserves the right to alter specification, design and construction in the course of continuous product development.

Specifications, drawings and images are provided for guidance in system design and tender documentation. Where a figure is critical to a design, confirm it in writing with SSOUNDS before committing to a specification.

All text, images and drawings herein are the property of SSOUNDS. All trademarks and registered trademarks are the property of their respective owners.