SSOUNDS XTO S221F

Name: SSOUNDS
Telephone: +1 307 312 8218

Flown subwoofer module of the XTO System, 1,300 mm wide, for hanging the low end with the main arrays.

Part of the XTO System. The flown subwoofer module, 1,300 mm wide, hung with the main arrays so the low end follows the hang. XTO stands for Xtended Touring Output. Full system documentation at s-soundspro.com/systems/xto.

At a glance

Model / SKU: SS-XTO-S221F
Category: Subwoofers
Brand: SSOUNDS
Drive: Passive
Condition: New

Applications

touringstadiumsubwoofercardioid

Overview

The XTO S221F is the flown subwoofer module of the XTO System: a 1,300 × 580 × 900 mm cabinet designed to hang with the main arrays instead of stacking beneath them, so the low end follows the hang from the front of the audience to the back. Full technical data is issued with the quotation.

Flown subwoofer module of the XTO System
1,300 × 580 × 900 mm

Technologies

DynaControl: Holds the tuned tonal balance as voice coils heat under sustained output.
CardioSteer: Steerable cardioid arrays that direct low-frequency energy forward.
FastSet: Steel and aluminium rigging with captive titanium pins and detented splay for repeatable array geometry.
SNet: Networked control and monitoring for every amplifier and processor in the system.

Specifications

General

Type	Flown subwoofer module

Physical & construction

Dimensions (W × H × D)¹

1,300 × 580 × 900 mm

Notes

1.Dimensions are stated in millimetres and exclude protruding rigging hardware, handles and connector panels unless noted.
2.All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.

Downloads & data files

SSOUNDS XTO S221F: User Manualmanual
SSOUNDS XTO S218F: Technical Data Sheetdatasheet

Loudspeaker data files for prediction software (GLL / CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Contact support@s-soundspro.com and we will send the current release for this model.

System operation

Recommended: SSOUNDS D24X, one channel per XTO S218F (4 Ω) with the S218 preset loaded. Cardioid presets are supplied for three- and four-box columns. A flown subwoofer column is normally run as its own zone, so its arrival time and its cardioid rear rejection can be set independently of the ground-stacked arcs.

Architectural & engineering specification

The subwoofer shall be of the SSOUNDS XTO S221F type, configured as a flown subwoofer module. The subwoofer shall be measuring 1,300 × 580 × 900 mm. The subwoofer shall be covered by the manufacturer's two (2) year limited warranty and shall be supplied by SSOUNDS or an SSOUNDS-authorised distributor. No alternate shall be accepted without prior written approval of the consultant or specifying engineer.

Safety & compliance

Read this section before specifying, installing or operating this product. It summarises the safety requirements set out in full in the product documentation supplied with the unit; where the two differ, the product documentation takes precedence.

Suspension & rigging: Overhead suspension is potentially hazardous and must be carried out only by trained and competent personnel using SSOUNDS-approved hardware, within the working load limits and array configurations published in the relevant SSOUNDS rigging documentation. Never exceed the stated number of enclosures per array or the stated splay limits. Inspect all rigging components, pins and retaining clips before every deployment and withdraw from service any component that is deformed, corroded or of unknown history. Secondary safety attachment is required where local regulation calls for it. SSOUNDS accepts no liability for systems suspended using non-approved hardware or outside published limits.
Sound pressure level & hearing: This equipment is capable of producing sound pressure levels that cause permanent hearing damage. Do not operate at high level in close proximity, and ensure that operators, performers and audience exposure complies with applicable occupational noise-exposure regulation. Provide hearing protection where exposure limits may be exceeded.
Environment & mechanical: Unless a published IP rating states otherwise, this product is intended for indoor use or for outdoor use under cover, and must be protected from rain, standing water and prolonged direct sun. Ensure ventilation openings are unobstructed. Stack, pole-mount and transport only as described in the product documentation, and secure the product against toppling wherever the public has access.
Disposal: At end of life, dispose of the product and any packaging in accordance with local regulation for electrical and electronic equipment. Do not dispose of electronic components in general waste.

Limited warranty: two (2) years

SSOUNDS products are warranted against defects in materials and workmanship for a period of two (2) years from the original date of purchase by the end user. Within that period SSOUNDS will, at its option, repair or replace the defective item with no charge for parts or labour. The item must be adequately packaged and dispatched, carriage pre-paid, to SSOUNDS or an SSOUNDS-authorised service centre, accompanied by proof of purchase and a returns reference issued in advance by SSOUNDS. Unauthorised repair, modification or removal of serial-number labelling voids this warranty.

This warranty does not cover

Cosmetic wear, finish, grille cloth, paintwork and consumable parts.
Damage caused by misuse, abuse, accident, neglect, or operation outside the published ratings on this sheet.
Damage caused by transport or handling after delivery, or by inadequate packaging on return.
Damage caused by mains or generator supply faults (over-voltage, under-voltage, phase imbalance, surge or incorrect earthing) or by lightning.
Water, dust or corrosion ingress on products not carrying a published IP rating for the conditions of use.
Damage resulting from amplification or processing outside the recommended configuration on this sheet, or from third-party presets.
Products not purchased from SSOUNDS or an SSOUNDS-authorised distributor.

This warranty is in addition to, and does not affect, any statutory rights the purchaser may have under applicable consumer law. It is the sole warranty offered; no other warranty, express or implied, is given.

Warranty claims and returns references: support@s-soundspro.com · +1 307 312 8218

Legal notice

All information on this data sheet is subject to change without notice. SSOUNDS reserves the right to alter specification, design and construction in the course of continuous product development.

Specifications, drawings and images are provided for guidance in system design and tender documentation. Where a figure is critical to a design, confirm it in writing with SSOUNDS before committing to a specification.

All text, images and drawings herein are the property of SSOUNDS. All trademarks and registered trademarks are the property of their respective owners.