What is the best speaker for an airport in Jeddah?

Airports demand exceptional speech intelligibility, reliable voice alarm, and flexible zoning. In large, reverberant halls typical of Jeddah's climate and architecture, column loudspeakers like the SSOUNDS LC8.2 and LC16.2 provide tightly controlled vertical coverage, reducing reflections and improving STI. For lower ceilings and distributed systems, CL6 and CL8 ceiling loudspeakers offer discreet, high-performance audio. Where higher SPL or longer throw is needed, such as in check-in areas or baggage halls, SSOUNDS P4, P5, P6T, P10T, and P12T install loudspeakers (T models for 70/100 V lines) or M series point-source boxes and subwoofers deliver the required output and pattern control.

Selection depends on space geometry and acoustic conditions. For a typical airport, we recommend a hybrid approach: LC series columns for main concourses and departure lounges to achieve STI greater than 0.5, CL series ceilings for offices, restrooms, and retail areas, and P or M series for large open zones. All loudspeakers should be on supervised 100 V lines with redundant A series amplifiers, ensuring EN 54 and BS 5839-8 compliance. Zoning must align with evacuation zones and operational paging needs, with Dante networking for flexible routing and DSP for equalisation and delay.

Sizing requires acoustic modeling. SSOUNDS engineers use AI-assisted prediction to determine speaker count, spacing, and power taps, optimising intelligibility and coverage. For example, a column every 8 to 12 metres in a reverberant hall, or ceiling speakers at 6 to 8 metre intervals in low-ceiling areas. Amplifier channels are allocated with 20 to 30 percent headroom, and redundancy is built in for critical paths. SSOUNDS provides full design, installation, and commissioning services across Jeddah, ensuring systems meet local civil aviation and safety standards.