What is the best speaker for a conference room in Muscat?

Conference rooms demand a different approach from live sound. The priority is speech clarity from every seat, whether the source is a person at the table or a remote participant on a video call. That means controlled directivity, low distortion at conversational levels, and even coverage without hot spots or dead zones. SSOUNDS install loudspeakers are engineered for exactly this: the CL6 and CL8 ceiling models provide discreet, wide dispersion for low ceilings, while the LC8.2 and LC16.2 slim columns suit rooms with hard surfaces or where ceiling access is limited. For larger boardrooms or divisible spaces, the P4, P5, P6T, P10T and P12T install loudspeakers (T models for 70/100 V line) offer higher output and tighter pattern control.

Selection starts with room geometry and ceiling height. In a typical 8 to 12 seat room with a 2.7 to 3 m ceiling, four to six CL6 ceiling loudspeakers on a 70 V line, spaced evenly and powered by an SSOUNDS A series networked amplifier with DSP, will cover the table and presentation area. For rooms with higher ceilings or glass walls, the LC8.2 column can be wall mounted at ear height to keep speech directed at listeners and away from reflective surfaces. Add an M series point-source box or subwoofer only if the room also handles multimedia playback with low-frequency content. The A series amplifiers include Dante networking and onboard DSP, so you can tune EQ, delay and limiting to match the room acoustics and integrate directly with beamforming microphones and echo cancellation processors.

Sizing is about coverage, not just loudness. Aim for a maximum SPL of 70 to 75 dB at the listener with 10 to 15 dB of headroom for peaks. Use the manufacturer's coverage prediction to place ceiling loudspeakers on a grid that overlaps at the listener plane, typically 4 to 6 m spacing for CL6 and 6 to 8 m for CL8. For column loudspeakers, mount them so the vertical coverage reaches the back row without overshooting the front. Always commission with a measurement of speech transmission index (STI) or similar, and set the DSP so the system remains intelligible when the HVAC and video conferencing are running.

SSOUNDS designs and installs across Muscat, with engineering support from our UK and European R&D and regional operations in Nigeria and Ghana. We work with system integrators, consultants and venue technical directors to specify the right combination of ceiling, column or point-source loudspeakers, networked amplification and control. For a conference room in Muscat, the correct answer is not a single box but a properly designed distributed system: CL6 or CL8 ceiling loudspeakers for most rooms, LC8.2 or LC16.2 columns where ceiling mounting is not possible, and an A series amplifier with DSP and Dante to tie it all together.