SSOUNDS · SS-DSP-48
SSOUNDS DSP 4×8
Procesador de altavoces de 4 entradas y 8 salidas, 96 kHz, filtros de 1/36 de octava y alineación completa del sistema.
El SSOUNDS DSP 4×8 es el procesador de sistema detrás de nuestros equipos de gira e instalación: cuatro entradas balanceadas, ocho salidas balanceadas y un motor de coma flotante de 300 MHz que funciona a 96 kHz. Cinco secciones de ecualización paramétrica por salida con resolución de 1/36 de octava, filtros de paso alto y paso bajo independientes con respuestas Bessel, Butterworth y Linkwitz-Riley, retardo de alineación y limitación por salida. Una unidad de rack, 4.2 kg, y los mismos ajustes preestablecidos de altavoces que nuestros ingenieros usan en el sitio.
Specifications
Engineering data. The conditions each figure is specified under are stated below the table.
General
- Type
- Digital loudspeaker processor, 4 in / 8 out
- Certifications
- TÜV
Processing
- Engine
- 300 MHz high-performance floating-point DSP · 32-bit
- Sample rate
- 96 kHz
- Parametric EQ
- 5 sections per output · +15 dB to −30 dB in 0.1 dB steps
- EQ centre frequency
- 20 Hz – 20 kHz · 1/36-octave (368 positions) · Q 0.01–10
- High-pass filter
- 1 per output · 10 Hz – 16 kHz · 1/36-octave steps
- Low-pass filter
- 1 per output · 60 Hz – 22 kHz · 1/36-octave steps
- Filter types
- Bessel / Butterworth 12 · 18 · 24 dB per octave · Linkwitz-Riley 24 dB per octave
- Limiters
- Per output channel
Connections
- Inputs
- 4 × XLR3 electronically balanced · CMRR > 65 dB (50 Hz – 10 kHz)
- Outputs
- 8 × XLR3 electronically balanced · max +20 dBu into 600 Ω
- Control
- Front panel · USB (loudspeaker control software)
Performance
- Frequency response
- 20 Hz – 20 kHz (96 kHz sampling)
Measurement conditions
- Net weight excludes packaging, flight case, accessories and optional rigging hardware.
- Dimensions are stated in millimetres and exclude protruding rigging hardware, handles and connector panels unless noted.
- All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.
Downloads
Product documentation, free to open. No registration, no form. The data sheet is a PDF rendered from the page below it; the manual is a print page, so use your browser to print it or save it as PDF.
- Technical data sheetFull specification set with the measurement conditions for each figure, modelled response curves, safety notices and warranty terms.PDF · SS-DS-DSP-48-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
- Technical data sheet, in your browserThe same document as a page, if you would rather read it here or print it yourself.HTML print view · SS-DS-DSP-48-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
- Architectural and engineering specificationThe “shall be” paragraph for tender documents and bills of quantities, written from this product’s own specification rows. Section of the data sheet.HTML section · SS-DS-DSP-48-EN-A4
- User manualUnpacking, connection, installation, operating limits, maintenance schedule and troubleshooting for this model.HTML print view · SS-UM-DSP-48-EN-A4 · Rev. 2608 · Issued 14 Aug 2026
Loudspeaker data files for prediction software (GLL and CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Email support@s-soundspro.com and we will send the current release for this model.
Featured products
SSOUNDS
SSOUNDS XTO 14P
Cardioid dual 14″ large-format element, 3-way quad-amplified, 153 dB peak, one D34X per box.
FeaturedSSOUNDS
SSOUNDS XTO 12P
Large-format element of the XTO System, 3-way quad-amplified, 149 dB peak SPL from a Socapex-loomed touring element.
FeaturedSSOUNDS
SSOUNDS XTO 10P
Mid-format element of the XTO System, 3-way 10″, 100° constant directivity, 144 dB peak, 0°–14° splay.
FeaturedSSOUNDS
SSOUNDS LS310
Flagship of the LS series, large-format quad-amplified line array, 143 dB peak, 110° × 8°.