What is the best speaker for an office in Lusaka?

An office sound system must deliver even coverage at low SPL, clear speech for paging, and, where required, sound masking to reduce distraction. The most effective approach is a distributed ceiling loudspeaker system on a 70/100 V line, which allows long cable runs with minimal loss and simple zone control. SSOUNDS CL6 and CL8 ceiling loudspeakers are engineered for this: they provide wide, consistent dispersion and are voiced for speech intelligibility and music quality at background levels. For spaces with high ceilings or where ceiling access is limited, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers offer controlled vertical coverage and can be wall mounted. In larger open plan areas or meeting rooms requiring higher output, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers (T models for 70/100 V line) or M series point-source boxes with subwoofers can be added.

Selection and sizing start with the space. For typical office ceiling heights (2.7 to 3.5 m), ceiling loudspeakers should be spaced to achieve overlap at listener ear height, usually 3 to 6 m apart depending on ceiling height and desired uniformity. In open plan areas, more, lower-level loudspeakers give better masking and speech privacy than fewer, louder ones. Meeting rooms benefit from separate zones so paging can be directed or muted as needed. Corridors, reception and restrooms may require different spacing. SSOUNDS A series networked amplifiers with DSP and Dante provide the zone control, equalisation and delay needed to tune each area, and Dante allows simple integration with existing AV and paging systems.

Sound masking is often achieved by playing a low-level, broadband noise through the same ceiling loudspeakers, either full time or during working hours. This requires a system with sufficient headroom and even coverage, which is why the distributed 70/100 V line approach with SSOUNDS CL series is preferred. For offices in Lusaka, SSOUNDS designs and installs across the city, working with local integrators and consultants to specify the right loudspeaker type, count and amplifier configuration. We do not publish prices because system cost depends on venue size, ceiling type, zone count, cabling, installation and commissioning. To get an accurate quotation, contact SSOUNDS with your floor plan and requirements.