Skip to content

What is the best speaker for an office in Copenhagen?

Quick answer

For an office in Copenhagen, the right speaker depends on the space: CL6 and CL8 ceiling loudspeakers on a 70/100 V line for open plan areas and meeting rooms, LC8.2 and LC16.2 slim column loudspeakers for high ceilings or reverberant spaces, and P4, P5, P6T, P10T or P12T install loudspeakers for zones needing higher output. SSOUNDS A series networked amplifiers with DSP and Dante provide zone control and paging. SSOUNDS designs and installs across Copenhagen.

Office sound systems must deliver clear speech for paging, even background music, and effective sound masking to reduce distraction in open plan areas. The choice of loudspeaker depends on ceiling height, room size, and the level of control required. For standard ceiling heights, SSOUNDS CL6 and CL8 ceiling loudspeakers on a 70/100 V line offer discreet, even coverage. In spaces with high or exposed ceilings, LC8.2 and LC16.2 slim column loudspeakers provide controlled vertical dispersion to keep sound on the listeners and off reflective surfaces.

For zones that need higher SPL or more directional coverage, such as reception areas or large meeting rooms, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers are suitable. The T models operate on 70/100 V lines for long cable runs and multiple units per amplifier channel. Where low-frequency reinforcement is required, M series point-source boxes and subwoofers can be added. All loudspeakers should be powered by SSOUNDS A series networked amplifiers with DSP and Dante, which allow zone control, paging, and sound masking to be managed over a network.

Sizing a system requires considering the area to be covered, ceiling height, ambient noise level, and the desired intelligibility. As a guide, ceiling loudspeakers are typically spaced to provide overlapping coverage at ear height, with the spacing determined by ceiling height and loudspeaker dispersion. Column loudspeakers are often used in rooms with ceilings above 4 metres or where speech intelligibility is critical. Networked amplifiers should be selected with enough channels and power to drive the required number of loudspeakers per zone, with headroom for future expansion.

SSOUNDS designs and installs across Copenhagen, providing system design, equipment, and commissioning for offices and other commercial spaces. Our engineering team uses AI-assisted acoustic modeling to predict coverage and optimise loudspeaker placement before installation. For a tailored solution, contact SSOUNDS to discuss your project.

Key things to consider

  • CL6 and CL8 ceiling loudspeakers on 70/100 V line for open plan and meeting rooms.
  • LC8.2 and LC16.2 slim column loudspeakers for high ceilings and reverberant spaces.
  • P4, P5, P6T, P10T and P12T install loudspeakers for zones needing higher output.
  • A series networked amplifiers with DSP and Dante for zone control, paging and sound masking.
  • SSOUNDS designs and installs across Copenhagen.
See what SSOUNDS supplies for Commercial Spaces

Need the right system specced for your venue?

SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.

Talk to an engineer Browse systems

Systems referenced

Chat on WhatsApp