What is the best speaker for an office in Dallas?

In an office, audio serves three main functions: background music, paging and sound masking. Open plan areas need even coverage at low levels to avoid hot spots and dead zones, while meeting rooms require clear speech for presentations and conferencing. Ceiling loudspeakers on a 70/100 V line are the standard choice for distributed systems because they allow many units to be run from a single amplifier channel with simple level control per zone. SSOUNDS CL6 and CL8 ceiling loudspeakers are designed for this, with wide dispersion and smooth response for music and speech.

For spaces with high ceilings or where ceiling installation is impractical, SSOUNDS slim column loudspeakers like the LC8.2 and LC16.2 provide controlled vertical coverage, keeping sound on the listeners and reducing reflections. In meeting rooms, they can be mounted either side of a display or on the wall, delivering intelligibility for speech. Where higher output or directional coverage is needed, such as in a large atrium or a divisible room, SSOUNDS P series install loudspeakers (P4, P5, P6T, P10T, P12T) or M series point source boxes and subwoofers can be used. The T models operate on 70/100 V lines for long cable runs.

Selection and sizing start with the room dimensions, ceiling height, ambient noise level and the required coverage. For background music and paging, a general rule is one ceiling loudspeaker per 25 to 50 square metres, but this varies with ceiling height and desired uniformity. In open plan offices, spacing should be based on the loudspeaker's coverage angle at ear height, typically aiming for overlap of 50 percent. Sound masking is often integrated into the same ceiling loudspeakers or separate emitters, tuned to a broadband spectrum that reduces speech intelligibility from nearby conversations. SSOUNDS engineers use acoustic modelling to predict coverage and optimise the design before installation.

The system is powered and controlled by SSOUNDS A series networked amplifiers with DSP and Dante. These allow multiple zones, each with independent volume and EQ, and can be integrated with a paging system or building management. Dante audio networking simplifies cabling and future expansion. SSOUNDS designs and installs across Dallas, working with local integrators and consultants to deliver systems that meet the specific needs of each office. For a tailored design, contact SSOUNDS with your floor plans and requirements.