What is the best speaker for an office in Freetown?

Open plan offices and meeting rooms need even, low level coverage rather than high SPL. Ceiling loudspeakers on a 70/100 V line let you run long cable runs with low loss and tap each speaker for the right level. SSOUNDS CL6 and CL8 ceiling loudspeakers are designed for this: they provide wide, smooth coverage and are quick to install in grid or plaster ceilings. For areas with high ceilings or where ceiling access is limited, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers offer controlled vertical coverage and can be wall mounted, keeping sound on the listeners and reducing reflections.

Zoning is essential. You want separate zones for open plan areas, meeting rooms, reception and corridors so paging can be targeted and music levels can differ. SSOUNDS A series networked amplifiers with DSP and Dante give you zone control, EQ, limiting and delay, and allow you to route paging and music independently. For larger floors, multiple amplifiers can be networked over Dante, and the DSP can handle sound masking by shaping the spectrum and level to reduce speech intelligibility across workstations.

Sizing follows a simple rule: for background music and paging, aim for one ceiling loudspeaker per 15 to 25 square metres, depending on ceiling height and desired uniformity. In meeting rooms, place loudspeakers over the table area, not at the edges, and keep levels low. For sound masking, use a dedicated masking generator or DSP channel and set the level just below normal speech, typically around 45 to 50 dBA, and ensure the spectrum is balanced. Always design for at least 6 dB of headroom above the masking level for paging clarity.

SSOUNDS designs and installs across Freetown. For a system that meets your specific floor plan and acoustic conditions, contact SSOUNDS to discuss a site survey and a tailored design using our install range.