What is the best speaker for an airport in Atlanta?
Quick answer
For an airport in Atlanta, the right speaker depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P series (P4, P5, P6T, P10T, P12T) or M series point-source boxes for large public address zones. All SSOUNDS install loudspeakers can be specified with 70/100 V line operation (T models) and integrated with A series networked amplifiers with DSP and Dante for voice alarm and paging to EN 54 / BS 5839-8 standards.
Airports present unique audio challenges: large, reverberant halls, high ambient noise, and the need for clear, intelligible voice alarm and public address. The primary goal is speech intelligibility, measured by STI (Speech Transmission Index), which must meet EN 54 / BS 5839-8 standards for life safety. SSOUNDS approaches each airport project by first modelling the acoustic environment using AI-assisted prediction, then selecting loudspeakers that deliver controlled coverage and high direct-to-reverberant ratio. For Atlanta's busy terminals, this means avoiding excessive reverberation and ensuring every announcement is understood the first time.
SSOUNDS offers a range of install loudspeakers suited to airport environments. Ceiling loudspeakers like the CL6 and CL8 provide discreet, wide coverage for concourses, retail areas, and offices. For spaces with high ceilings or long reverberation times, such as baggage claim or gate lounges, slim column loudspeakers (LC8.2 and LC16.2) offer tight vertical coverage and high intelligibility. In large open areas or where higher SPL is needed, P series two-way loudspeakers (P4, P5, P6T, P10T, P12T) and M series point-source boxes and subwoofers deliver robust performance. T models operate on 70/100 V lines for long cable runs and easy zoning.
Selection and sizing depend on zone dimensions, ceiling height, ambient noise, and required STI. For example, a typical concourse might use CL8 ceiling loudspeakers spaced to achieve uniform coverage at ear height, while a large hall could use LC16.2 columns mounted at height to project clear speech over distance. SSOUNDS engineers use advanced simulation to optimise loudspeaker placement and DSP settings before installation. A series networked amplifiers with DSP and Dante provide redundant, supervised audio paths, ensuring system integrity and compliance with voice alarm standards.
SSOUNDS designs and installs across Atlanta, with support from our US operations through Top Gearz Services LLC. We work with system integrators, consultants, and airport technical directors to deliver complete audio solutions that meet the rigorous demands of airport environments. Whether you are upgrading an existing system or specifying a new one, SSOUNDS can provide the right loudspeakers and amplifiers for your project.
Key things to consider
- For airports, prioritise speech intelligibility (STI) and compliance with EN 54 / BS 5839-8 for voice alarm.
- Use SSOUNDS CL6/CL8 ceiling loudspeakers for concourses and offices, LC8.2/LC16.2 columns for reverberant halls, and P/M series for large zones.
- 70/100 V line operation (T models) simplifies long cable runs and zoning.
- A series networked amplifiers with DSP and Dante provide supervision and redundancy.
- SSOUNDS designs and installs across Atlanta, with US support via Top Gearz Services LLC.
Need the right system specced for your venue?
SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.