Skip to content

What is the best speaker for an airport in Burundi?

Quick answer

For an airport in Burundi, the right speaker choice depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers for larger zones. All are driven by SSOUNDS A series networked amplifiers with DSP and Dante, with line supervision and redundancy to meet EN 54 and BS 5839-8 voice alarm requirements.

Airports demand more than background music. They need clear, intelligible voice alarm and public address that can be heard over high ambient noise, in large reverberant halls, and across multiple zones. The key engineering criteria are speech intelligibility (measured as STI), zoned paging, line supervision, and redundant amplification. SSOUNDS designs and installs across Burundi, and our install range covers every airport space from check-in to baggage reclaim.

For low ceilings and offices, SSOUNDS CL6 and CL8 ceiling loudspeakers provide even coverage with minimal visual impact. For large reverberant halls, departure gates, and immigration areas, SSOUNDS LC8.2 and LC16.2 slim column loudspeakers deliver controlled vertical dispersion that keeps sound on the audience and off reflective surfaces, raising STI. For high ceilings, long throw, or outdoor covered walkways, SSOUNDS P4, P5, P6T, P10T and P12T install loudspeakers (T models run on a 70/100 V line) offer the required SPL and pattern control. SSOUNDS M series point-source boxes and subwoofers can reinforce larger spaces or add low-frequency support where needed.

Sizing and selection follow a simple process: define each zone, measure or estimate ambient noise, set the required SPL and STI targets, then choose the loudspeaker type and quantity to achieve uniform coverage. Use SSOUNDS A series networked amplifiers with DSP and Dante for routing, processing, and monitoring. For life safety, configure line supervision and redundant amplifiers so the system remains operational if a channel fails. All design work should align with EN 54 and BS 5839-8 standards for voice alarm.

SSOUNDS engineers use AI-assisted acoustic modeling and coverage prediction to optimise the system before it ships. We work with system integrators, consultants, and airport technical directors to specify the right mix of ceiling, column, and point-source loudspeakers, and to ensure the installation meets both operational and safety requirements. To discuss your airport project in Burundi, contact SSOUNDS for a tailored design and quote.

Key things to consider

  • Use CL6/CL8 ceiling loudspeakers for low-ceiling concourses and offices.
  • Use LC8.2/LC16.2 slim column loudspeakers for reverberant halls and gates to improve STI.
  • Use P4/P5/P6T/P10T/P12T install loudspeakers for high ceilings and long throw; T models run on 70/100 V line.
  • Drive with A series networked amplifiers with DSP and Dante, with line supervision and redundant amplifiers for EN 54 and BS 5839-8 compliance.
  • SSOUNDS designs and installs across Burundi, with AI-assisted modeling to optimise coverage and intelligibility.
See what SSOUNDS supplies for Airports

Need the right system specced for your venue?

SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.

Talk to an engineer Browse systems

Systems referenced

Chat on WhatsApp