What is the best speaker for an airport in Guadalajara?
Quick answer
For an airport in Guadalajara, the right speaker choice depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and offices, LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas, and P4, P5, P6T, P10T or P12T install loudspeakers for large spaces, with M series point-source boxes and subwoofers for high-SPL zones. All are driven by SSOUNDS A series networked amplifiers with DSP and Dante, and SSOUNDS designs and installs across Guadalajara.
Airports demand voice alarm and public address systems that meet EN 54 and BS 5839-8 standards, with high speech intelligibility (STI) in large reverberant halls, zoned paging, line supervision and redundant amplification. The best speaker is not one model but a properly engineered combination of ceiling, column and point-source loudspeakers selected for each acoustic zone. SSOUNDS install range covers this: CL6 and CL8 ceiling loudspeakers for low-ceiling areas, LC8.2 and LC16.2 slim column loudspeakers for reverberant spaces, and P4, P5, P6T, P10T and P12T install loudspeakers for larger zones. T models run on 70/100 V lines for long cable runs and multiple speakers per circuit.
For practical selection, start with the acoustic challenge. In check-in halls and baggage reclaim, where ceilings are low and reverberation is moderate, ceiling loudspeakers such as the CL6 or CL8 provide even coverage and discrete installation. In tall, reverberant concourses and gate lounges, slim column loudspeakers like the LC8.2 or LC16.2 deliver controlled vertical dispersion, keeping sound on the listeners and off reflective surfaces, which raises STI. For very large or high-SPL areas such as outdoor piers or hangars, use P series install loudspeakers (P4, P5, P6T, P10T, P12T) or M series point-source boxes and subwoofers, all available in 70/100 V versions where needed.
Sizing and zoning are critical. Divide the airport into paging zones that match operational needs: terminals, gates, security, baggage, and back-of-house. Use SSOUNDS A series networked amplifiers with DSP and Dante for flexible routing, redundancy and supervision. Each zone should be designed with prediction software to achieve the required STI, typically above 0.50 for voice alarm. Line supervision and redundant amplifiers ensure compliance and reliability. SSOUNDS engineers use AI-assisted acoustic modeling to optimise coverage and intelligibility before installation.
SSOUNDS designs and installs across Guadalajara. Our team can specify the right mix of ceiling, column and point-source loudspeakers, amplifiers and DSP for your airport project, ensuring compliance with EN 54 and BS 5839-8. Contact us to discuss your requirements and request a quote.
Key things to consider
- Use CL6 or CL8 ceiling loudspeakers for low-ceiling concourses and offices.
- Use LC8.2 or LC16.2 slim column loudspeakers for reverberant halls and gate areas.
- Use P4, P5, P6T, P10T or P12T install loudspeakers for large spaces and high-SPL zones.
- Drive all zones with SSOUNDS A series networked amplifiers with DSP and Dante for supervision and redundancy.
- SSOUNDS designs and installs across Guadalajara, with engineering support from our UK, US, Nigeria and Ghana bases.
Need the right system specced for your venue?
SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.