What is the best speaker for an airport in Guinea-Bissau?
Quick answer
For an airport in Guinea-Bissau, the right speaker is a life safety compliant system combining SSOUNDS CL6 and CL8 ceiling loudspeakers, LC8.2 and LC16.2 slim column loudspeakers, P series install loudspeakers (P4, P5, P6T, P10T, P12T) and M series point source boxes, all driven by SSOUNDS A series networked amplifiers with DSP and Dante. SSOUNDS designs and installs across Guinea-Bissau, delivering EN 54 and BS 5839-8 compliant voice alarm and public address with the intelligibility large reverberant terminals demand.
Airport terminals are acoustically demanding: long reverberation times, high ambient noise from aircraft and crowds, and vast open concourses. The priority is not musical output but speech intelligibility, measured as STI or STIPA, and full compliance with EN 54 and BS 5839-8 for voice alarm. Every loudspeaker must be selected for even coverage, controlled directivity and low distortion at the required SPL, with line supervision and redundant amplification to maintain operation under fault conditions.
SSOUNDS approaches an airport as a zoned, life safety system. Ceiling loudspeakers such as the CL6 and CL8 suit check in halls, lounges, retail and circulation areas where a low profile and even overhead coverage are needed. For high ceilings, glass facades and reverberant departure halls, the LC8.2 and LC16.2 slim column loudspeakers provide tight vertical directivity that keeps energy on the listener and away from reflective surfaces, raising STI. P series install loudspeakers (P4, P5, P6T, P10T, P12T) cover larger spaces and exterior areas, with T models running on 70/100 V lines for long cable runs and simple power tapping. M series point source boxes and subwoofers handle baggage reclaim, gate areas and any space needing higher SPL or music reinforcement.
Sizing and selection follow a clear process: define the acoustic environment and required STI, set the target SPL with headroom for alarm signals, model the coverage to avoid gaps and excessive overlap, then choose the loudspeaker type and tap setting that meets the brief with the fewest devices. Zoning should follow the airport's evacuation and paging strategy, with each zone independently addressable and supervised. SSOUNDS A series networked amplifiers with DSP and Dante provide the routing, equalisation, delay and monitoring that tie the system together, with redundant amplifier channels for critical zones.
SSOUNDS designs and installs across Guinea-Bissau, working with integrators, consultants and airport technical teams from acoustic modelling through to commissioning. To specify the right system for your terminal, share your floor plans, ceiling heights, ambient noise levels and evacuation zoning, and our engineers will provide a tailored design and quotation.
Key things to consider
- Prioritise EN 54 and BS 5839-8 compliance, STI intelligibility, zoned paging and line supervision over raw output.
- Use CL6 and CL8 ceiling loudspeakers for low ceilings and general circulation, LC8.2 and LC16.2 columns for reverberant halls and high spaces.
- Deploy P series install loudspeakers (P4, P5, P6T, P10T, P12T) and M series point source boxes for larger areas and higher SPL, with T models on 70/100 V lines.
- Drive the system with SSOUNDS A series networked amplifiers with DSP and Dante, including redundant amplification for critical zones.
- SSOUNDS designs and installs across Guinea-Bissau; request a design and quote with your plans and acoustic data.
Need the right system specced for your venue?
SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.