What is the best speaker for an airport in Rome?
Quick answer
For an airport in Rome, the right speaker choice depends on the space: use SSOUNDS CL6 or CL8 ceiling loudspeakers for low, even coverage in terminals and concourses, LC8.2 or LC16.2 slim column loudspeakers for high-reverberation halls, and P4, P5, P6T, P10T or P12T install loudspeakers on 70/100 V lines for large public areas. All are driven by SSOUNDS A series networked amplifiers with DSP and Dante, and SSOUNDS designs and installs across Rome.
Airports demand voice alarm and public address that meets EN 54 and BS 5839-8 standards, with high speech intelligibility (STI) in large, reverberant halls, zoned paging, line supervision and redundant amplification. The speaker type must match the acoustic environment: ceiling loudspeakers for low ceilings and even coverage, columns for tall spaces with glass and hard surfaces, and point-source boxes for long-throw or high-SPL areas.
SSOUNDS install range covers these needs. CL6 and CL8 ceiling loudspeakers provide discreet, wide coverage in check-in, retail and circulation areas. LC8.2 and LC16.2 slim column loudspeakers deliver controlled vertical directivity to keep sound off reverberant surfaces, improving STI in terminals and baggage halls. P4, P5, P6T, P10T and P12T install loudspeakers (T models run on 70/100 V lines) handle larger zones, gates and exterior areas, while M series point-source boxes and subwoofers support high-output or music reinforcement where required.
Selection and sizing start with the acoustic model: map ceiling height, surface finishes and ambient noise, then set coverage and SPL targets per zone. Use ceiling models where ceilings are low and uniform, columns where ceilings are high or reflective, and point-source boxes for long distances. Distribute loudspeakers for overlapping coverage at ear height, keep taps and zones aligned with the emergency plan, and specify line supervision and redundant amplifiers on the A series networked platform with DSP and Dante.
SSOUNDS designs and installs across Rome, with engineering support from our UK, US, Nigeria and Ghana bases. For a system that meets EN 54 and BS 5839-8, improves STI and integrates zoned paging, contact SSOUNDS to discuss your airport project.
Key things to consider
- Match speaker type to space: CL6/CL8 ceilings for low, even coverage; LC8.2/LC16.2 columns for reverberant halls; P series and M series for large or high-SPL zones.
- Use 70/100 V line operation (T models) for long cable runs and easy zoning in airport public address.
- Drive with SSOUNDS A series networked amplifiers with DSP and Dante for line supervision, redundancy and zoned paging.
- Design for STI: control directivity, overlap coverage at ear height and align zones with the emergency plan.
- SSOUNDS designs and installs across Rome, with support from our UK, US, Nigeria and Ghana operations.
Need the right system specced for your venue?
SSOUNDS designs, supplies, installs and tunes professional AVL across Nigeria & Africa.