What is the best speaker for an office in Salt Lake City?

Offices require a loudspeaker system that balances speech intelligibility, music quality and sound masking without visual intrusion. Ceiling loudspeakers are ideal for open plan areas and meeting rooms because they distribute sound evenly and blend into the architecture. The SSOUNDS CL6 and CL8 ceiling loudspeakers are designed for 70/100 V line operation, allowing multiple units to be connected on a single amplifier channel with simple tap settings. For spaces with high ceilings or where ceiling installation is impractical, the LC8.2 and LC16.2 slim column loudspeakers provide controlled vertical coverage and can be wall mounted. Where higher output or directional coverage is needed, such as in a large atrium or a divisible meeting suite, the P4, P5, P6T, P10T and P12T install loudspeakers or M series point-source boxes offer flexible solutions.

Selecting the right loudspeaker type depends on room geometry, ceiling height and the primary function. In open plan offices, ceiling loudspeakers should be spaced to achieve overlapping coverage at ear height, typically with 3 to 4 metre spacing for a 2 to 3 metre ceiling. For sound masking, the goal is a uniform, low level broadband noise that reduces speech distraction; this requires careful tuning of the system EQ and level. Meeting rooms benefit from separate zones so that paging can be directed only where needed, and local volume control can be provided. The SSOUNDS A series networked amplifiers with DSP and Dante enable zone control, equalisation and delay, and can be integrated with a building management system. For paging, a microphone or telephone system interface connects to the amplifier, and the DSP handles prioritisation and routing.

Sizing the system involves calculating the required SPL, considering the ambient noise level and the desired signal-to-noise ratio. Background music typically requires 70 to 75 dB SPL, while paging should reach 75 to 80 dB SPL for clear intelligibility. Sound masking levels are usually set 3 to 5 dB below the paging level. The number of loudspeakers is determined by the coverage area and the chosen spacing pattern. For a typical open plan office, a grid layout of ceiling loudspeakers on a 70/100 V line with tap settings of 1 to 2 watts per unit is common. The amplifier power is then calculated from the total tapped power plus a headroom margin of at least 20 percent. SSOUNDS engineers use AI-assisted acoustic modelling to predict coverage and optimise loudspeaker placement before installation, ensuring that the system meets the performance criteria without over-specifying.

SSOUNDS designs and installs across Salt Lake City, with support from our offices in the United Kingdom, United States, Nigeria and Ghana. We work with system integrators, consultants and venue technical directors to specify the right solution for each project. To discuss your office installation, please contact us for a consultation and quote.