SSOUNDS XTO 10P

Elemento de formato médio do Sistema XTO, 10″ tri-via, diretividade constante de 100°, 144 dB de pico, abertura de 0°–14°.

touringworshipline-array

Solicitar orçamento Falar com um engenheiro Compare

O XTO 10P é o elemento de formato médio do Sistema XTO: tri-via, quad-amplificado, com dois drivers de LF de 10", um midrange de 8" e dois drivers de HF de 2,7" em um guia de ondas isofásico, 144 dB de pico em 48 Hz a 20 kHz. Quad-amplificado via NL8, equipado com pinos de abertura de 0° a 14° codificados por cores, e dimensionado para interligar com o XTO 8P para downfill perfeito. Ele compartilha o rigging, amplificação e presets do sistema com todos os outros módulos, então um projeto de arena e um projeto de estádio são o mesmo método em escalas diferentes.

Part of the XTO System

Mid-size element for arena and large corporate work, with wider adjustable splay.

XTO stands for Xtended Touring Output. The large-format touring platform: the elements built for the longest throws and the highest output in the range, rigged and amplified as one system.

The XTO System

Key features

2 × 10″ LF, 8″ MF and 2 × 2.7″ HF on an isophasic waveguide
144 dB peak SPL, 48 Hz – 20 kHz (−10 dB)
Quad-amplified over a single NL8 cable per cabinet
100° constant directivity with colour-coded 0°–14° splay pins
Shares its cabinet and rigging with the XTO 8P, interlocks directly for downfill
High-grade titanium rigging, up to 24 elements per hang
IsoPhase waveguide sums the HF section into one coherent wavefront
DynaControl holds the tuned response flat at maximum SPL

Specifications

Engineering data. The conditions each figure is specified under are stated below the table.

General

Type: 3-way line-array element · quad-amplified
Certifications: CE · TÜV (rigging system) · EAC · WEEE

Components

Low frequency: 2 × 10″ cone drivers, dipolar arrangement · 16 Ω
Mid frequency: 1 × 8″ horn-loaded cone driver · 16 Ω
High frequency: 2 × 2.7″ diaphragm compression drivers on isophasic waveguide · 16 Ω

Acoustic

Frequency response²: 48 Hz – 20 kHz (−10 dB)
Coverage⁴: 100° × 8°
Directivity control⁴: Nominal horizontal maintained to 370 Hz
Sensitivity³: 105 dB SPL nominal (1 W @ 1 m)
Maximum SPL¹: 144 dB peak @ 1 m

Electrical

Recommended amplifier power⁵: 2,320 W
Nominal impedance⁶: LF1 16 Ω · LF2 16 Ω · MF 16 Ω · HF 16 Ω
Crossover: 220 Hz · 900 Hz
Amplification: Quad-amplified by SSOUNDS D24X system DSP amplifier (D14X drives 2 cabinets)
Cabinets per amplifier: 2 per D14X · up to 4 per D24X · four 16 Ω sections in parallel present 4 Ω per channel

Connections

Connectors: 2 × NL8 speakON (in / link)
Pin map: 1+/1− LF1 · 2+/2− LF2 · 3+/3− MF · 4+/4− HF

Rigging

System: High-grade titanium 3-point captive rigging · colour-coded splay pins
Splay angles: 0° – 14° adjustable
Array compatibility: Shares cabinet dimensions and rigging with XTO 8P, locks directly as far-throw and downfill; locks with XTO 12P via transition hardware
Max per array: Up to 24 elements per hang

Physical

Dimensions (H × W × D)⁸: 320 × 780 × 560 mm
Net weight⁷: 38 kg / 84 lb
Enclosure: 15 mm Baltic birch · Polyurea finish
Grille: Powder-coated perforated steel with acoustic cloth backing
Handles: 2 side · 2 rear recessed
Colour: Black (custom RAL on request)

Measurement conditions

Maximum SPL is the peak level at 1 m, driven with pink noise at crest factor 4 to the clipping point of the recommended amplifier, with the SSOUNDS system preset applied. Full-range enclosures are specified under free-field conditions; figures marked half-space are specified over a reflecting plane, the condition subwoofers are deployed in, which adds approximately 6 dB.
Frequency response is specified on axis at 1 m in a free field. The tolerance the figure is referenced to is stated alongside it; where no tolerance is given, the figure is the −6 dB bandwidth.
Sensitivity is specified at 1 W into the nominal impedance at 1 m on axis, averaged across the pass band of the enclosure.
Coverage angles are nominal −6 dB values averaged across the pass band. Per-octave directivity data is available from SSOUNDS system design support for prediction and modelling.
Recommended amplifier power is the amplifier output SSOUNDS specifies for this enclosure, driven with the SSOUNDS system preset. It guides amplifier selection and is not an AES power-handling rating for the transducers.
Nominal impedance is the manufacturer's rating for amplifier load calculation; minimum impedance across the operating band may be lower.
Net weight excludes packaging, flight case, accessories and optional rigging hardware.
Dimensions are stated in millimetres and exclude protruding rigging hardware, handles and connector panels unless noted.
All figures are typical values for production units specified under the conditions above. Individual units may vary within published tolerances.

Directivity

48 Hz15.8 kHz

Directivity computed by the SSOUNDS system prediction engine from this product's driver complement, the same dataset the printed data sheet uses. 1/24-octave band-power resolution; values are dB relative to on-axis.

System operation

Recommended: SSOUNDS D24X quad amplifier, up to four XTO 10P per amplifier, each channel driving the same section (LF1, LF2, MF, HF) across all four cabinets. The 16 Ω sections put four cabinets in parallel at 4 Ω per channel, so a 10P rig needs a quarter of the amplifiers an 8 Ω cabinet would. Run fewer cabinets per amplifier where the design calls for finer gain or HF shading across the hang. XTO 10P shares its cabinet dimensions and rigging with the XTO 8P, so the two lock directly for far-throw and downfill; both lock with the XTO 12P via transition hardware. Typical deployments, 8 × XTO 10P per side over 4 × XTO S218: mid-size touring and large worship. 6 × XTO 10P with 2 × S18 per side: conference and theatre. Add XTO 8P beneath the hang as downfill for front-row coverage.

Downloads

Product documentation, free to open. No registration, no form. The data sheet is a PDF rendered from the page below it; the manual is a print page, so use your browser to print it or save it as PDF.

Loudspeaker data files for prediction software (GLL and CLF for EASE), 2D and 3D drawings and certification documents are issued on request. Email support@s-soundspro.com and we will send the current release for this model.